Sign in Request access

Home · Migrations · ArubaOS to Cisco IOS-XE

Switch migration / Scope first

ArubaOS
to Cisco IOS-XE

Translate an ArubaOS switch configuration toward Cisco Catalyst IOS-XE. This is not the Aruba CX to Cisco path. ArubaOS is source-only, and there is no direct Cisco IOS-XE switch to JunOS switch path.

Discuss this migration →Compare migration paths →

Account approval and feature support apply. A listed migration path does not certify every model, version or configuration.

The short answer

Which Aruba to Cisco page is this?

This page is ArubaOS to Cisco IOS-XE. The existing Aruba to Cisco guide is Aruba CX to IOS-XE. Both are switch paths for approved accounts. Both stay in NEEDS REVIEW. ArubaOS cannot be a target.

Define the handoff

What goes in.
What you review.

Source inputs

An ArubaOS switch configuration export and the software version.

Target output

A Cisco IOS-XE switch candidate for the supported VLAN, trunking and Layer 3 scope, held in NEEDS REVIEW.

Path-specific boundaries

Juniper SRX is not a target. Arista EOS is not supported. Do not use this page for a router migration. Router paths are Cisco IOS-XE and Juniper JunOS.

Scope the review

Check the behavior,
not just the syntax.

REVIEW 01

VLANs

Confirm VLAN definitions and port membership against the Catalyst candidate.

REVIEW 02

Trunks and aggregation

Review trunk allowed lists and aggregated links before anyone pastes the candidate.

REVIEW 03

Layer 3 interfaces

Review SVIs and addresses that the findings show as translated.

REVIEW 04

What the check does not prove

A NEEDS REVIEW result is not live traffic validation or cutover approval.

Each result's status comes from deterministic checkpoints (CP0–CP4) and, on firewall paths, behavior checks (BC1–BC4); AI can explain findings but never sets status. These are review areas, not a guarantee that every construct in them is automated. Unsupported features, missing captures and conditional behavior remain part of the engineering review.

Every hosted router and switch result is held in NEEDS REVIEW for engineer review, even after the emitted configuration text is checked.

Questions

Common questions

Is ArubaOS a target on Cisco to Aruba migrations?

No. ArubaOS is source-only. Cisco IOS-XE to Aruba targets Aruba CX.

Does this include JunOS?

No. There is no direct Cisco IOS-XE switch to JunOS switch path. ArubaOS to JunOS is a separate guide.

Are router results treated the same way?

Yes. Every hosted router and switch result is held in NEEDS REVIEW.

Plan the next step

Bring the details
that make your migration different.

Bring the ArubaOS version and the Catalyst IOS-XE version you will review against.

Discuss your scope →Cisco to Aruba CX →